[cisco-voip] Cisco C200M1 server, Windows 2008 Server and RAID Controller driver

Wes Sisk wsisk at cisco.com
Fri Sep 17 15:09:12 EDT 2010


Which controller do you have?
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C200M1/install/RAID.html

/Wes

Jason Aarons (US) wrote:
> Since Windows 2008 is a couple years old, it doesn't have a built in raid controller driver for UCS C200M1 servers.  Windows did not discover the RAID controller in the server, and none of the drivers I've downloaded from Cisco appear to be correct. 
>
> Setting this up for Cisco ACS, thought maybe someone here had played with some UCS C-Series gear...
>
>
> -----------------------------------------
> Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only.  If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful.  If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   


More information about the cisco-voip mailing list