[cisco-voip] DB password change Best practices

Ovidiu Popa ovidiu at romandie.com
Thu Sep 23 15:58:56 EDT 2010


  Anyone ?

My client insist on changing the password himself after deployment.

We have a 3 server cluster. Can we change the database password without 
any issues ?

The installation guide lists the "set password security"command to use 
however it is not listed in the CUCM 8.x command line reference.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp463644 


Extract from the installation guide
"Yes, you can change the entry after installation by using the following 
CLI command:

CLI > set password security


Caution    To avoid losing communications between nodes, you must change 
the Security password on all nodes in a cluster and reboot all of the 
nodes.
For more information, refer to the description of this command in the 
Command Line Interface Reference Guide for Cisco Unifed Communications 
Solutions. "

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/ime/8_0_2/cli/imecli.html 


Wondering if it was just forgotten in the command reference or perhaps 
there are other reasons ...



Thanks for any feedback

Regards,
Ovidiu

On 22/Sep/10 7:40 PM, Ovidiu Popa wrote:
>  Hello everyone
>
> Just wondering what are the best practices for CUCM Database password 
> change:
>
> - Supported by TAC
> - Supported but not recommended
> - Not supported
>
> Any feedback from field-experience?
>
> Thanks
> Ovidiu
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



More information about the cisco-voip mailing list