[cisco-voip] Mobility and Return calls

[Eric Pedersen]

You can apply a calling transformation CSS to the remote destination profile, and it works independently of the normal CSS.  I did that to match a pattern of 9.! and strip pre-dot.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jim McBurnett
Sent: September 27, 2010 1:13 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Mobility and Return calls

Got one for the group...
Someone has been enjoying some feature creativity on a CUCM 7.1 cluster.....

History---
A few years ago the means to doing a missed call call back via CCM was to prefix the calling number with a 9 when it came in from gateway (if h.323)
Or to use a translation and prefix it that way...
This way the end user just hit the dial on the missed call and out it goes..

Now for the feature creativity..... Mix above with SNR...
Enter Mobility/SNR...
And when that call gets redirected out to the Cell phone it has the 9 in front and does not match ANY phone book entries...

Now I would normally  add a transformation CSS and move on.. but with 40 partitions and 45 CSSs this could be loads of fun...

How have each of you managed BOTH these challenges?

Thanks,
Jim

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100927/7f4d9172/attachment.html>