[cisco-voip] Transformation Pattern Usage

[Matthew Loraditch]

So If I want my caller ID to generally be our main number but for specific callers to be something else would I setup transformation patterns like follows and put them in a Partition accessible by the calling party transform CSS of my gateway?
Pattern: 1[2-9]XX[2-9]XXXXXX Calling Party Transformation Mask: Main Number
Pattern: CEO's Cell Calling Party Transformation Mask: Use Calling Party's External Phone Mask (AKA Expose their DID)

Also to be sure I'm clear if do my pre dot discards on my route list, my pattern at the transform needs to be w/o my access code and the dot?






Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100930/4edcf54f/attachment.html>