[cisco-voip] strange auto attendant issue
sam singapore
sam4sg at gmail.com
Mon Apr 11 11:11:15 EDT 2011
If this helps:
show voice dsp
DSP DSP DSPWARE CURR BOOT PAK
TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT
PACK COUNT
==== === == ======== ========== ===== ======= === == ========= == =====
============
edsp 0001 01 g711ulaw 0.1 IDLE 50/0/1.1
edsp 0002 02 g729r8 p 0.1 IDLE 50/0/1.2
edsp 0003 01 g711ulaw 0.1 IDLE 50/0/2.1
edsp 0004 02 g729r8 p 0.1 IDLE 50/0/2.2
edsp 0005 01 g729r8 p 0.1 IDLE 50/0/3.1
edsp 0006 02 g729r8 p 0.1 IDLE 50/0/3.2
edsp 0007 03 g729r8 p 0.1 IDLE 50/0/3.3
edsp 0008 04 g729r8 p 0.1 IDLE 50/0/3.4
edsp 0009 05 g729r8 p 0.1 IDLE 50/0/3.5
edsp 0010 06 g729r8 p 0.1 IDLE 50/0/3.6
edsp 0011 07 g729r8 p 0.1 IDLE 50/0/3.7
edsp 0012 08 g729r8 p 0.1 IDLE 50/0/3.8
edsp 0013 01 g729r8 p 0.1 IDLE 50/0/4.1
edsp 0014 02 g729r8 p 0.1 IDLE 50/0/4.2
edsp 0015 03 g729r8 p 0.1 IDLE 50/0/4.3
edsp 0016 04 g729r8 p 0.1 IDLE 50/0/4.4
edsp 0017 05 g729r8 p 0.1 IDLE 50/0/4.5
edsp 0018 06 g729r8 p 0.1 IDLE 50/0/4.6
edsp 0019 07 g729r8 p 0.1 IDLE 50/0/4.7
edsp 0020 08 g729r8 p 0.1 IDLE 50/0/4.8
edsp 0021 01 g711ulaw 0.1 IDLE 50/0/5.1
edsp 0022 02 g711ulaw 0.1 IDLE 50/0/5.2
edsp 0023 01 g729r8 p 0.1 IDLE 50/0/10.1
edsp 0024 01 g729r8 p 0.1 IDLE 50/0/11.1
edsp 0025 02 g729r8 p 0.1 IDLE 50/0/11.2
edsp 0026 01 g729r8 p 0.1 IDLE 50/0/12.1
edsp 0027 02 g729r8 p 0.1 IDLE 50/0/12.2
edsp 0028 01 g729r8 p 0.1 IDLE 50/0/13.1
edsp 0029 02 g729r8 p 0.1 IDLE 50/0/13.2
edsp 0030 01 g729r8 p 0.1 IDLE 50/0/14.1
edsp 0031 02 g729r8 p 0.1 IDLE 50/0/14.2
edsp 0032 01 g729r8 p 0.1 IDLE 50/0/15.1
edsp 0033 02 g729r8 p 0.1 IDLE 50/0/15.2
edsp 0034 01 g729r8 p 0.1 IDLE 50/0/16.1
edsp 0035 02 g729r8 p 0.1 IDLE 50/0/16.2
edsp 0036 01 g729r8 p 0.1 IDLE 50/0/17.1
edsp 0037 02 g729r8 p 0.1 IDLE 50/0/17.2
edsp 0038 01 g729r8 p 0.1 IDLE 50/0/18.1
edsp 0039 02 g729r8 p 0.1 IDLE 50/0/18.2
edsp 0040 01 g711ulaw 0.1 IDLE 50/0/19.1
edsp 0041 02 g729r8 p 0.1 IDLE 50/0/19.2
----------------------------FLEX VOICE CARD 0 -----------------------
-------
*DSP VOICE CHANNELS*
CURR STATE : (busy)inuse (b-out)busy out (bpend)busyout pending
LEGEND : (bad)bad (shut)shutdown (dpend)download pending
DSP DSP DSPWARE CURR BOOT PAK
TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT
PACK COUNT
====== === == ========= ========== ===== ======= === == ========= == ====
============
*DSP SIGNALING CHANNELS*
DSP DSP DSPWARE CURR BOOT PAK
TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT
PACK COUNT
====== === == ========= ========== ===== ======= === == ========= == ====
============
------------------------END OF FLEX VOICE CARD 0
----------------------------
Thanks,
Sam
On Mon, Apr 11, 2011 at 10:56 PM, sam singapore <sam4sg at gmail.com> wrote:
> Hi Erich,
>
> I am using Call Manager express, so there is COR only.
> I created a COR called local and put my incoming dialpeers as well as
> ephones allowing both incoming and outgoing from LOCAL, but still no luck.
>
> Is there anything else that I can look into ?
>
> Thanks,
> Sam
>
>
>
> On Thu, Apr 7, 2011 at 12:33 AM, Erich Novak <Erich.Novak at nts.eu> wrote:
>
>> 3 words :
>>
>>
>>
>> calling search space :)
>>
>>
>>
>> brgds
>>
>> Erich
>>
>>
>>
>> *Von:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *Im Auftrag von *sam singapore
>> *Gesendet:* Mittwoch, 06. April 2011 18:17
>> *An:* cisco-voip at puck.nether.net
>> *Betreff:* [cisco-voip] strange auto attendant issue
>>
>>
>>
>> Hi,
>>
>> I have a bit of a strange issue:
>>
>> When I dial the auto-attendant number form phones internally,
>>
>> welcome to automated attendant
>> to enter phone of person trying to reach press 1
>> 1
>> enter the phone number and then press the # key
>> XXX#
>> calling XXX ...
>> rings the extension, and call works fine.
>>
>>
>> But when I dial the DID Number (which again gets to this auto attendant)
>>
>> welcome to automated attendant
>> to enter phone of person trying to reach press 1
>> 1
>> enter the phone number and then press the # key
>> XXX#
>> calling XXX ...
>> the XXX does not get any ring, and the line just gets disconnected.
>>
>> So this is 1/2 working, 1/2 not working .. Where do I start looking to
>> solve it ? What could be the issue.
>>
>>
>> Thanks.
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110411/605e27f6/attachment.html>
More information about the cisco-voip
mailing list