[cisco-voip] SNR in cisco CUCME 8.0: not working for calls originating from the pstn

[Anthony Kouloglou]

Hi Adel and good morning,
i already have these commands configured under telephony service.:-(

transfer-pattern 0..........

On 14/4/2011 19:53, Adel Abushaev wrote:
> for non-local call transfers:
>
> under telephony-service:
>
> transfer-pattern [pattern to transfer to]
>
>
> On Thu, Apr 14, 2011 at 9:20 AM, Anthony Kouloglou<akoul at dataways.gr>  wrote:
>> Hi Adel,
>> it is a CME.
>> What should i add?
>>
>> On 14/4/2011 6:22 μμ, Adel Abushaev wrote:
>>> CM by default does not allow transfers for external calls. Did you
>>> change transfer rules?
>>>
>>> On Thu, Apr 14, 2011 at 8:08 AM, Anthony Kouloglou<akoul at dataways.gr>
>>>   wrote:
>>>> Hi all,
>>>> i have just tried to use the SNR feature of the CUCME but i am getting
>>>> really frustrated!
>>>> I have configured under my ephone-dn snr destination to my cell phone.
>>>> When i call  my extension from another extension of the local cme, it
>>>> works
>>>> fine.
>>>>
>>>> But, when i dial my DID phone directly from the PSTN network, the phone
>>>> rings for ever.
>>>> It just displays  new missed call right after the delay time ends, but it
>>>> keeps ringing for ever.
>>>>
>>>> Thanks in advance,
>>>> Anthony.
>>>>
>>>>
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110415/6b0f6edd/attachment.html>