[cisco-voip] MTP won't register

[Brian Schultz]

Tried it, no difference.  Still won't register.


On Wed, Apr 20, 2011 at 7:10 PM, Adel Abushaev <adel.abushaev at gmail.com>wrote:

> Since it is one the latest IOS (post 15.1(2)T), and just as a shot into the
> sky (it might be related in IOS code though), could you try this:
>
> voice service voip
>  no ip address trusted authenticate
>
> ?
>
>
>
> On Mon, Apr 18, 2011 at 1:04 PM, Brian Schultz <bms314 at gmail.com> wrote:
>
>> Here is a screenshot and interface config.  Pretty basic config here...
>>
>> Health2951#telnet 192.168.225.10 2000 /source-interface g0/0
>> Trying 192.168.225.10, 2000 ... Open
>>
>>
>> quit
>>
>>
>> [Connection to 192.168.225.10 closed by foreign host]
>> Health2951#sh run int g0/0
>> Building configuration...
>>
>> Current configuration : 155 bytes
>> !
>> interface GigabitEthernet0/0
>>  ip address 192.168.148.3 255.255.255.0
>>  no ip redirects
>>  no ip unreachables
>>  no ip proxy-arp
>>  duplex auto
>>  speed auto
>> end
>>
>>
>>
>>
>>
>>
>>
>>
>> On Mon, Apr 18, 2011 at 2:30 PM, Bernhard Albler <
>> bernhard.albler at gmail.com> wrote:
>>
>>> What names did you enter when inputing the enhanced media Termination
>>> Point? MTP... or just the MAC ?
>>> Next step would be to check the logs (GW or UCM) or a packet capture
>>> via utils network capture on the UCM.
>>> The second option would definitely help to check source adresses and
>>> wether the packets even reach the UCM.
>>>
>>> cheers
>>> bernhard
>>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110421/0c011aa6/attachment.html>