[cisco-voip] Config failure on sh ccm

[Scott Voll]

Looks like I was missing the dial-peer --> service mgcpapp --> port.

Scott

On Thu, Aug 4, 2011 at 11:39 AM, Scott Voll <svoll.voip at gmail.com> wrote:

> here is my show ccm
>
> MGCP Domain Name: VG.corp.abc.com
> Priority        Status                   Host
> ============================================================
> Primary         Registered               10.#. at .199
> First Backup    Backup Ready             10.#. at .200
> Second Backup   None
>
> Current active Call Manager:    10.#. at .199
> Backhaul/Redundant link port:   2428
> Failover Interval:              30 seconds
> Keepalive Interval:             15 seconds
> Last keepalive sent:            11:36:40 PDT Aug 4 2011 (elapsed time:
> 00:00:04)
> Last MGCP traffic time:         11:36:40 PDT Aug 4 2011 (elapsed time:
> 00:00:04)
> Last failover time:             03:36:14 PDT Aug 4 2011 from (10.0.2.199)
> Last switchback time:           03:36:59 PDT Aug 4 2011 from (10.0.2.200)
> Switchback mode:                Graceful
> MGCP Fallback mode:             Not Selected
> Last MGCP Fallback start time:  None
> Last MGCP Fallback end time:    None
> MGCP Download Tones:            Disabled
> TFTP retry count to shut Ports: 2
>
> Configuration Auto-Download Information
> =======================================
>  No configurations downloaded
> Current state: Waiting for commands
> Configuration Download statistics:
>         Download Attempted             : 34
>           Download Successful          : 34
>           Download Failed              : 0
>           TFTP Download Failed         : 0
>         Configuration Attempted        : 4
>           Configuration Successful     : 0
>           Configuration Failed(Parsing): 0
>           Configuration Failed(config) : 4 <------------  What causes this?
> Last config download command:
> FAX mode: disable
> Configuration Error History:
> voice-port 4
>  echo-cancel coverage 8
> end
>
>
> voice-port 4
>  echo-cancel coverage 8
> end
>
>
> voice-port 4
>  echo-cancel coverage 8
> end
>
> What causes a Configuration Failure?  VG is a 881 VPN'd into our network.
>  CM 7.1.5
>
> TIA
>
> Scott
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110805/28a53825/attachment.html>