[cisco-voip] Config failure on sh ccm

[Scott Voll]

You D' Man.

That fixed it.

Scott

On Sun, Aug 7, 2011 at 10:50 AM, Erick B. <erickbee at gmail.com> wrote:

> It's the echo-cancel coverage 8 command on the voice port, probably
> upgraded IOS to newer version where 8 is no longer an option. You can
> go into the port config on CUCM endpoint and change the echo cancel
> value there to something your IOS supports and reset the endpoint. You
> can find that out by going into config t mode then under the
> voice-port do the command manually and see what the values are. 64 or
> 128 should be the default in recent IOS versions. Yoiu can do a show
> voice port 4 to see what it is set to also.
>
>
> On Fri, Aug 5, 2011 at 8:42 AM, Scott Voll <svoll.voip at gmail.com> wrote:
> > Looks like I was missing the dial-peer --> service mgcpapp --> port.
> > Scott
> >
> > On Thu, Aug 4, 2011 at 11:39 AM, Scott Voll <svoll.voip at gmail.com>
> wrote:
> >>
> >> here is my show ccm
> >> MGCP Domain Name: VG.corp.abc.com
> >> Priority        Status                   Host
> >> ============================================================
> >> Primary         Registered               10.#. at .199
> >> First Backup    Backup Ready             10.#. at .200
> >> Second Backup   None
> >> Current active Call Manager:    10.#. at .199
> >> Backhaul/Redundant link port:   2428
> >> Failover Interval:              30 seconds
> >> Keepalive Interval:             15 seconds
> >> Last keepalive sent:            11:36:40 PDT Aug 4 2011 (elapsed time:
> >> 00:00:04)
> >> Last MGCP traffic time:         11:36:40 PDT Aug 4 2011 (elapsed time:
> >> 00:00:04)
> >> Last failover time:             03:36:14 PDT Aug 4 2011 from
> (10.0.2.199)
> >> Last switchback time:           03:36:59 PDT Aug 4 2011 from
> (10.0.2.200)
> >> Switchback mode:                Graceful
> >> MGCP Fallback mode:             Not Selected
> >> Last MGCP Fallback start time:  None
> >> Last MGCP Fallback end time:    None
> >> MGCP Download Tones:            Disabled
> >> TFTP retry count to shut Ports: 2
> >> Configuration Auto-Download Information
> >> =======================================
> >>  No configurations downloaded
> >> Current state: Waiting for commands
> >> Configuration Download statistics:
> >>         Download Attempted             : 34
> >>           Download Successful          : 34
> >>           Download Failed              : 0
> >>           TFTP Download Failed         : 0
> >>         Configuration Attempted        : 4
> >>           Configuration Successful     : 0
> >>           Configuration Failed(Parsing): 0
> >>           Configuration Failed(config) : 4 <------------  What causes
> >> this?
> >> Last config download command:
> >> FAX mode: disable
> >> Configuration Error History:
> >> voice-port 4
> >>  echo-cancel coverage 8
> >> end
> >>
> >> voice-port 4
> >>  echo-cancel coverage 8
> >> end
> >>
> >> voice-port 4
> >>  echo-cancel coverage 8
> >> end
> >> What causes a Configuration Failure?  VG is a 881 VPN'd into our
> network.
> >>  CM 7.1.5
> >> TIA
> >> Scott
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110809/3dd6fec0/attachment.html>