[cisco-voip] DT700 Series Phones and CUCM

[Tim H]

Anyone able to get an NEC DT700 series phone to register to CUCM.  I found
this information, but wondering if there is a way around it?

"The new SIP terminals (DT700’s) use what can be referred to as enhanced
SIP. It is
the basic SIP protocol with additional NEC proprietary information to
provide the
features and display information for the multiline phone."

I've gotten CUCM to show "registered" but the DT700 shows "SIP Server Not
Found"

Any ideas?

Thanks!
Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110822/41978a54/attachment.html>