[cisco-voip] prefix being added to on-net gateways

[Lelio Fulgenzi]

I have modified the CallManager Service Parameter to add a prefix to incoming calls. Unfortunately, this is being applied to incoming calls coming from our secondary PBX (HiCom 300E) which is using PRI connections. 

There is a setting on the gateway configuration page, Incoming Calling Party Settings, which states: "If the administrator sets the prefix to Default this indicates call processing will use prefix at the next level setting (DevicePool/Service Parameter). Otherwise, the value configured is used as the prefix unless the field is empty in which case there is no prefix assigned." 

I have clicked the Clear Prefix Settings button so they are all blank, but the prefix still shows up on calls from this gateway. 

Any ideas? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110823/1055821c/attachment.html>