[cisco-voip] MGCP echo cancelation

[Scott Voll]

Thanks for the follow up.

Second question.  TAC wants me to update the Echo Cancellers to 128 but CM
only has a drop down for up to 64ms.  (CM 7.1.5)  if I put the 128 on the
VGW, any time I update the VGW it will get over written, correct?

I'm troubleshooting DSP issues but I don't want to make this harder than it
needs to be.

Thoughts?

Scott



On Thu, Dec 8, 2011 at 6:57 PM, Gr <grccie at gmail.com> wrote:

> Definitely, once you hit apply without doubt, will drop all active calls.
>
> Sent from my iPhone
>
> On 09/12/2011, at 8:15 AM, Scott Voll <svoll.voip at gmail.com> wrote:
>
> > if I change the echo cancellation on a MGCP gw and click apply will it
> drop calls going on the pri's?
> >
> > TIA
> >
> > Scott
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111209/42229129/attachment.html>