[cisco-voip] Moving to 10 digit dialing

[Mike King]

I found a funny, and thoughtful post on this awhile ago:

http://networkingnerd.net/2011/05/26/9-must-die/



On Tue, Dec 20, 2011 at 12:42 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> Mark makes a good point here for the transition period when 7 digit
> dialing coincides with 10 digit dialing, 7 digit dialing can be all
> encompassing, and 10 digit dialing should only be for your area codes. Once
> the transition is complete, the 10 digit dialing should be all encompassing
> and the 7 digit dialing should be for specific digit strings.
>
> That would be the way I would go anyways.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ------------------------------
> *From: *"Mark Holloway" <mh at markholloway.com>
> *To: *"Mike Hyde" <mhyde at monitor.mts.net>
> *Cc: *"cisco-voip VOIP" <cisco-voip at puck.nether.net>
> *Sent: *Tuesday, December 20, 2011 12:35:13 PM
> *Subject: *Re: [cisco-voip] Moving to 10 digit dialing
>
>
> Sorry, make that $ not !    My brain is in Unix mode today. :)
>
> dial-peer 7 < Support 7 digit dialing
> [2-9]......$
>
> dial-peer 10 < Support 10 digit dialing in your area
> 213[2-9]......$
>
> dial-peer 11 < Support North American Long Distance
> 1[2-9].........$
>
>
> On Dec 20, 2011, at 10:33 AM, Mark Holloway wrote:
>
> For clarification, I assume this is for North America? If your area code
> is 213 you could create the following:
>
> dial-peer 7 < Support 7 digit dialing
> [2-9]......!
>
> dial-peer 10 < Support 10 digit dialing in your area
> 213[2-9]......!
>
> dial-peer 11 < Support North American Long Distance
> 1[2-9].........!
>
>
> When your area switches to 10 digit and it is enforced by your telco, you
> could prepend 213 to the dialed digits in dial-peer 7 if needed.
>
>
> On Dec 20, 2011, at 9:36 AM, Mike Hyde wrote:
>
> > Is there a way on a CME/UC5** series system to have both 7 and 10 digit
> dialing?  Our area is switching to 10 digit dial next year, so we are
> looking at configuring the system with both till the cutover is done.
> >
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111220/5758352d/attachment.html>