[cisco-voip] Cius Feedback?

[Mike King]

Just got to that point.   argg.

And my manager wanted to play with his new toy "Now!"

Off to schedule a Cluster reboot.

Anything else I should know before I reboot?  I'm on 8.5.1.11900-21.  I've
uploaded the .cop file on all Pub/SUBs.

On Wed, Dec 21, 2011 at 1:45 PM, Nate VanMaren <VanMarenNP at ldschurch.org>wrote:

>  If your system already knows about the CIUS and your just updateing
> firmware, then just a TFTP restart is ok.  If you’re adding a new device,
> you have to reboot the whole cluster.****
>
> ** **
>
> -Nate****
>
> ** **
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Mike King
> *Sent:* Wednesday, December 21, 2011 10:51 AM
> *To:* Cisco VoIP List
>
> *Subject:* Re: [cisco-voip] Cius Feedback?****
>
> ** **
>
> Just got my demo cius today. ****
>
> ** **
>
> The COP file doesn't require a reboot or anything (just a TFTP restart)?
> (Just covering my bases)****
>
> ** **
>
> All I've found is the Wireless LAN deployment guide.
> http://www.cisco.com/en/US/docs/voice_ip_comm/ccmcd/deploy/9_2_1/english/ciusdply921.pdf
> ****
>
>   ****
>
> Is there anything else for documentation out there?****
>
> ** **
>
> ** **
>
> On Wed, Dec 21, 2011 at 9:34 AM, Ryan Ratliff <rratliff at cisco.com> wrote:*
> ***
>
> Right now the external display is a mirror of the main Cius display
> (720p).  The ability to have a separate display with a larger resolution is
> highly desired but I don't know if it's been committed to a release yet.**
> **
>
> ** **
>
> -Ryan****
>
> ** **
>
> On Dec 20, 2011, at 9:11 PM, Ki Wi wrote:****
>
> ** **
>
> Hey guys,
> Anyone tried the micro-hdmi or the displayport output to monitor ?
>
> What's the maximum resolution it can support for vdi ?
>
> Sent from my iPhone
> Pls pardon my fat fingers.
>
> On 20 Dec, 2011, at 5:29 AM, Jeffrey Ollie <jeff at ocjtech.us> wrote:
>
>
> ****
>
> On Mon, Dec 19, 2011 at 1:21 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> ****
>
>  ok - i remember now... the .cnf.xml files are stored in memory, so as
> long****
>
>   as you have the correct filename, you can download the file directly
> from****
>
>   your TFTP server using the same PumpKIN tool.****
>
>  ** **
>
>  I had gotten as far as needing the XMLDefault.cnf.xml.  With some****
>
>  experimentation I found out that I needed to add:****
>
>  ** **
>
>  <loadInformation593>sipcius.9-2-2-49</loadInformation593>****
>
>  ** **
>
>  to the XMLDefault.cnf.xml to get the Cius to do the upgrade.****
>
>  ** **
>
>  -- ****
>
>  Jeff Ollie****
>
>  _______________________________________________****
>
>  cisco-voip mailing list****
>
>  cisco-voip at puck.nether.net****
>
>  https://puck.nether.net/mailman/listinfo/cisco-voip****
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip****
>
> ** **
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip****
>
> ** **
>
>
>
> NOTICE: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information. Any
> unauthorized review, use, disclosure or distribution is prohibited. If you
> are not the intended recipient, please contact the sender by reply email
> and destroy all copies of the original message.****
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111221/3802fb18/attachment.html>