[cisco-voip] how do calling party transformations work anyways?

[Lelio Fulgenzi]

ah crap, how the heck do i get call manager traces on v7.1? ayieeeeeeeeeeeeeeeeeee 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
To: "paul dial" <dialp at ucar.edu> 
Cc: cisco-voip at puck.nether.net 
Sent: Friday, December 23, 2011 11:23:48 AM 
Subject: Re: [cisco-voip] how do calling party transformations work anyways? 


Turns out you can apply it to the device (phone), but I can't seem to get it working. Not sure if my upstream configs are overwriting it or not though. 

I will have to do some more troubleshooting......ugh, I haven't looked at CallManager traces in forever. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "paul dial" <dialp at ucar.edu> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: cisco-voip at puck.nether.net 
Sent: Friday, December 23, 2011 11:20:56 AM 
Subject: Re: [cisco-voip] how do calling party transformations work anyways? 

You can apply the calling party transformation on the Device Pool or (at least for MGCP GW) in the "Call Routing Information - Outbound Calls" section of the gateway configuration page. There might be other locations too, but I think you'd want to put it as close to the destination as possible, the idea being that if you have a different local calling number presentation standard (i.e. 7 vs 10 digits, etc) at your remote destinations, you can customize for each remote location. 

paul 

On 12/23/2011 8:43 AM, Lelio Fulgenzi wrote: 


sorry, i guess the question should read, where do i apply the CSS that contains the partition that contains the transformations. 




----- Original Message -----
From: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
To: cisco-voip at puck.nether.net 
Sent: Friday, December 23, 2011 10:42:22 AM 
Subject: [cisco-voip] how do calling party transformations work anyways? 


OK, still on this remote destination kick, trying to see how we can make things a bit better. 

I'd like to be able to display the extension on the remote destination rather than the external calling mask (which is the same for everybody). 

I was thinking of using a calling party transformation mask, but I can't seem to find where to apply the darn thing. If I have to create a transformation for each remote destination, I might be able to live with that, but I just wanna see it work for now. 

Going to CCO now.... 

Any ideas in the meantime? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
_______________________________________________
cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111223/23875ac0/attachment.html>