[cisco-voip] Call Manager 7.0.1 Hardware Swap

Churchill, Jason Jason.Churchill at uxcconnect.com.au
Wed Feb 2 08:32:18 EST 2011


Not a problem at all.

That is certainly one idea. I could retire the Subscriber, rebuild it to a new publisher, DRR import the 7.01, then upgrade to 7.1.5. Defiantly a good idea.

Anyone know of any other way?

Thanks Lelio









From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
Sent: Thursday, 3 February 2011 12:29 AM
To: Lelio Fulgenzi
Cc: Churchill, Jason; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Call Manager 7.0.1 Hardware Swap

Sorry, I realize now there was a bit more to your issue than just booting the new hardware.
Could you take on of the old servers offline and build it new from v7.0.1, upgrade it, and then back up and restore to the new cluster?

That's one idea.

You could probably buy a used server cheap too.

Sent from my iPhone

On Feb 2, 2011, at 8:24 AM, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:
You'll need to buy a media kit. About $150 bucks list I think. Min version for new servers is 7.1(3b) I believe.

Sent from my iPhone

On Feb 2, 2011, at 8:18 AM, "Churchill, Jason" <Jason.Churchill at uxcconnect.com.au<mailto:Jason.Churchill at uxcconnect.com.au>> wrote:
Hi all,

I have a quick question for the list. I have to perform an upgrade for my customer. They have old 7825H2 and H3 servers which are currently running CUCM 7.0.1
New hard ware has been purchased by them and we have been asked to complete the migration from their current server hardware to the new hardware. During this move we will move them to the latest stable release of CUCM 7.1.5

The process we were going to follow was to take a DRS backup for the current 7.01 system, restore to the new hardware with 7.01 installed, upgrade to 7.02 then to 7.1.5. However when I put the dvd of CUCM 7.0.1 into the new IBM MCS servers, it will not detect the hardware or any devices on the system. Only the keyboard and video display works. This leaves me to believe that since the 7.0.1 DVD was made back in 2008, the new IBM hardware drivers are not loaded on the install disk, and therefore the system can’t detect the drivers to allow the install to continue.

So I was wondering what everyone would do in this situation? Does cisco provide an updated 7.0.1 bootable DVD that can be used on the new servers? As DRS can only restore to the same version on the new server, we either have to:

1.       Upgrade the current live cluster to 7.1.5 or

2.       Work out a way to get the older 7.0.1 software on the new IBM MCS servers.

At all possible costs, we would like to avoid upgrading the live system to 7.1.5 on box, as the current system is pretty unstable. However this may be the only viable way forward.

Can anyone suggest any other ways of getting around this issue?

Thanks.
Jason

________________________________
CONFIDENTIALITY - The information contained in this electronic mail message is confidential and is intended solely for the addressee(s). If you are not an authorised recipient of this message please contact UXC Connect Pty Ltd immediately by reply email and destroy/delete this message from your computer. Any unauthorised form of reproduction of this message, or part thereof, is strictly prohibited.
DISCLAIMER - Unless specifically indicated otherwise, the views and opinions expressed in this email are those of the sender and not UXC Connect Pty Ltd. While we endeavour to protect our network from computer viruses, UXC Connect Pty Ltd does not warrant that this email or any attachments are free of viruses or any other defects or errors. It is the duty of the recipient to virus scan and otherwise test any information contained in this email before loading onto any computer system.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

________________________________
CONFIDENTIALITY - The information contained in this electronic mail message is confidential and is intended solely for the addressee(s). If you are not an authorised recipient of this message please contact UXC Connect Pty Ltd immediately by reply email and destroy/delete this message from your computer. Any unauthorised form of reproduction of this message, or part thereof, is strictly prohibited.
DISCLAIMER - Unless specifically indicated otherwise, the views and opinions expressed in this email are those of the sender and not UXC Connect Pty Ltd. While we endeavour to protect our network from computer viruses, UXC Connect Pty Ltd does not warrant that this email or any attachments are free of viruses or any other defects or errors. It is the duty of the recipient to virus scan and otherwise test any information contained in this email before loading onto any computer system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110203/c09a0f19/attachment.html>


More information about the cisco-voip mailing list