[cisco-voip] dial peer question

[Joel Perez]

We need some more info to know what is going on.
Where are you running the test from, etc....
Pasting the config would help.

Joel P

On Thu, Feb 10, 2011 at 10:53 AM, Aaron Quin <aquin at ibrtek.com> wrote:

> I have a question and I’m hoping somebody can help, cause I’m stumped.  I’m
> doing a new installation into an existing site with a PRI and no matter how
> I write the outbound dial peers, nothing matches.  I can even create one
> that’s a full number like 303xxxxxxx and when I test it it says no match.  I
> also tried it for 911 too, if I set up a dial peer for 911, and then dial
> 911 it doesn’t match.  I can post my config if somebody wants it, but
> anybody have any ideas?
>
>
>
> Aaron Quin
>
> Spaceco Business Solutions
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110210/acd77dde/attachment.html>