[cisco-voip] IP Communicator Bug or WAD

[Lelio Fulgenzi]

The <None> partition is at the end of every calling search space and is searched if no match is found in the partitions explicitly included. 

The one thing I'm not clear on is if the <None> partition is searched for a better match or if it is searched only if no matches are found. 

For example: 

    • Route Pattern 5XXXX in Group_A_Partition 
    • DN 51111 in <None> partition 
    • CSS Group_A_CSS contains Group_A_Partition. 
    • DN 52222 assigned CSS of Group_A_CSS 
    • DN 52222 dials 51111 
    • what will 52222 reach? the route pattern or the DN 51111? 




--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Scott Voll" <svoll.voip at gmail.com> 
To: "Ryan Ratliff" <rratliff at cisco.com> 
Cc: cisco-voip at puck.nether.net 
Sent: Friday, February 11, 2011 10:49:57 AM 
Subject: Re: [cisco-voip] IP Communicator Bug or WAD 

That is NOT what I wanted you to say. 


Quick Follow up question. Since I'm new to this environment, How does the NONE partition work with other partitions in a CSS? is the None Partition at the end and I could "fix" this by putting the 503123.4567 translation into a partition? 


Thanks 


Scott 


On Fri, Feb 11, 2011 at 7:44 AM, Ryan Ratliff < rratliff at cisco.com > wrote: 



It's a matter of whether the digits are sent enbloc or not. I don't believe CIPC supports enbloc so it will always send digits one at a time (just like other phones do when dialing offhook) and thus will always hit your 5XXX translation pattern. 



-Ryan 





On Feb 11, 2011, at 10:27 AM, Scott Voll wrote: 
So I'm troubleshooting why my Corporate Directory does not work (10 digits from AD LDAP) 




If I pick up the 7962 and dial 5031 the 7961 hits the 5XXX translation pattern and goes to VM. BUT if I enter 5031234567 and press Dial, it hits the 503123.4567 translation pattern and dials correctly the 4567. Both Translation patterns are in the None partition. 



BUT if I do the same thing on the IP communicator client weather I pick up and dial or enter and dial it hits the 5XXX translation because it dials the numbers one digit at a time rather than the full 10 digits like the 7961. 



Looks to be a Bug with the IPC client or is it Working As Designed? 



Ultimately I’m trying to dial the 10 digits from Corporate directory which gets the 10 digits from AD LDAP. 




Any idea of a work around? I 




TIA 




Scott 




PS. CM 7.1.5, IPC 7.0.5.1, 7961 running 9.0.3S 

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 



_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110211/e7abaf42/attachment.html>