[cisco-voip] CUCM Upgrade

Lelio Fulgenzi lelio at uoguelph.ca
Sat Feb 19 13:09:30 EST 2011


You could also change the device defaults firmware config parameters. 

Sent from my iPhone

On Feb 19, 2011, at 1:07 PM, "Buchanan, James" <jbuchanan at presidio.com> wrote:

> I had a customer do this last Sunday. The only change was the firmware. Attendant Console was unaffected. If you don’t want to deal with the firmware, you could hard code the firmware on the phones until you are ready for the jump because the old firmware will stay on the server.
> 
>  
> 
> James Buchanan | Technology Manager, UC | South Region | Presidio Networked Solutions 
> 12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com
> D: 615-866-5729 | F: 615-866-5781 | www.presidio.com
> 
> CCIE #25863, Voice
> 
> 
>  
> 
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of H, Tim
> Sent: Saturday, February 19, 2011 8:13 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] CUCM Upgrade
> 
>  
> 
> All,
> 
>  
> 
> I'm getting ready to upgrade our CUCM cluster from 7.02 to 7.15.  I'm aware of the firmware jump as you have to upgrade to 8.52sr1 or whatever, but is there anything else I need to be cautious about?  Looks like the attendant console might change a bit in the version jump, but should still function?
> 
>  
> 
> Any other caveats that anyone have ran into would be helpful.
> 
>  
> 
> Thanks,
> 
> Tim
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110219/243b20d4/attachment.html>


More information about the cisco-voip mailing list