[cisco-voip] CUCM 7 Debug LDAP

[Ryan Ratliff]

DirSync is the service that you need to enable debugs for.  I'd agree with Jason that unless you are doing ldaps wireshark can be the quickest way to find out what's going on with the sync if you know what to look for.

-Ryan

On Feb 22, 2011, at 8:26 AM, Jason Aarons (US) wrote:

In the past I’ve found Wireshark using SPAN on a switch port was faster/easier, or Network Monitor on the DC.
 
 
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jimhend FORTIN Dany
Sent: Tuesday, February 22, 2011 8:12 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CUCM 7 Debug LDAP
 
Hi,
 
Where in CUCM 7 I can find the log file of the LDAP synchronization.  LDAP synchronization does not work and I do not know why.
 
Thanks for your regards
 
 
Dany
 
 
Jimhend jeterapres at hotmail.com




Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110222/4e058e14/attachment.html>