[cisco-voip] Replace Hard Drive MCS7845-H2

[Wes Sisk]

the last i recall hot swap is supported so long as the server has 
already marked the drive bad.  if you swap a drive that is not marked 
bad you may be in for unpleasant surprise.



On 2/25/2011 11:35 AM, Mike King wrote:
> Hey Bill,
>
> There was a Field Notice in 2008 about Hard Drives Dying:
> http://www.cisco.com/en/US/ts/fn/630/fn63042.html
>
>
> But Rasim is right, it's a Hot Swap Drive (according to the spec sheet)
> http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_data_sheet0900aecd80587390.html
>
> On Fri, Feb 25, 2011 at 10:58 AM, Bill Riley 
> <bill at hitechconnection.net <mailto:bill at hitechconnection.net>> wrote:
>
>     I have a hard drive that failed on a MCS7845-H2 server. How do I
>     rebuild the array when I replace the drive? Do I just hot swap it
>     and will it rebuild automatically or do I need to restart the
>     server and go into the RAID controller? Thanks.
>
>
>     _______________________________________________
>     cisco-voip mailing list
>     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110225/bb8d6199/attachment.html>