[cisco-voip] minimum version of ucm for vg202

Lelio Fulgenzi lelio at uoguelph.ca
Fri Jan 14 19:46:54 EST 2011


try downloading and installing the latest dev pack for 6.1 and see if that helps. 

i took a look at the readme but it doesn't say which products it supports, it just lists default firmware versions. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Tim Frazee" <tfrazee at gmail.com> 
To: cisco-voip at puck.nether.net 
Sent: Friday, January 14, 2011 6:40:26 PM 
Subject: [cisco-voip] minimum version of ucm for vg202 

I have a 6.1.3.3190 UCM system that is supposed to support the vg202 (per the data sheets) but its not a choice in the new gateway dropdown. Adding the gateway is a choice on a 7.1.3.32900 system. 

Is something needed to make the vg202 show up as an option in 6.x? (perhaps a .cop or .qed file) 

Thank you all for any help you can offer. 



_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110114/78045281/attachment.html>


More information about the cisco-voip mailing list