[cisco-voip] Fw: CUBE SIP to H323 query

[Joel Perez]

In my experience you will need them sooner or later. Unless you are really,
really trying to save money then I would not go without DSP's on a GW.
Go ahead and order them, it wont hurt anything except your wallet a little
bit.

Joel P.

On Mon, Jan 17, 2011 at 11:45 AM, Cisco Voip <cisco_newbie at yahoo.com> wrote:

> Dear Sir,
>
> This is my first project so frankly i didnt understand what you meant by
> define your requirements.
>
> Call hold and transfer will surely be there. So do i need dsp resources ?
>
> My apologies but i am total new to voip, if you could pls take out some
> time to clear things for me.
>
> I will be thankful
>
> ------------------------------
> *From:* Bill Riley <bill at hitechconnection.net>
> *To:* Cisco Voip <cisco_newbie at yahoo.com>
> *Cc:* cisco-voip at puck.nether.net
> *Sent:* Mon, January 17, 2011 8:21:13 AM
>
> *Subject:* RE: [cisco-voip] Fw: CUBE SIP to H323 query
>
> Correct. Your question was if you needed them or not.  Define your
> requirements.
>
>
>
> “After researching alot on cisco, kindly guide me that do i need DSP
> resources for translating between SIP and H.323 ? My findings were. If i
> want to support supplementary services then yes i need DSP. For basic calls,
> i dont need them. “
>
>
>
>
> *From:* Cisco Voip [mailto:cisco_newbie at yahoo.com]
> *Sent:* Monday, January 17, 2011 9:48 AM
> *To:* Bill Riley
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Fw: CUBE SIP to H323 query
>
>
>
> Sir, during my research on netpro, i read that i will be needing MTP to
> provide supplementary services (call hold/transfer).
>
> I am really confused
>
>
> ------------------------------
>
> *From:* Bill Riley <bill at hitechconnection.net>
> *To:* Cisco Voip <cisco_newbie at yahoo.com>; cisco-voip at puck.nether.net
> *Sent:* Mon, January 17, 2011 5:43:04 AM
> *Subject:* RE: [cisco-voip] Fw: CUBE SIP to H323 query
>
>
> No you don’t “need” them.
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Cisco Voip
> *Sent:* Monday, January 17, 2011 7:28 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Fw: CUBE SIP to H323 query
>
>
>
> Someone pls guide me
>
>
>
> ----- Forwarded Message ----
> *From:* Cisco Voip <cisco_newbie at yahoo.com>
> *To:* cisco-voip at puck.nether.net
> *Sent:* Sun, January 16, 2011 10:54:18 PM
> *Subject:* [cisco-voip] CUBE SIP to H323 query
>
> Hi all experts.
>
> My scenario is simple. I will be using CUCM v8 and connecting it to 2821
> (running CME or higher) over H.323. SIP trunk will be terminated on this
> 2821 router via local ITSP.
>
> After researching alot on cisco, kindly guide me that do i need DSP
> resources for translating between SIP and H.323 ? My findings were. If i
> want to support supplementary services then yes i need DSP. For basic calls,
> i dont need them.
>
> I am a bit newbie to cisco voip, pls guide me
>
> Note: I know already that instead of H.323 i can use SIP which is more
> prefered. But still to clear my concept, guide me with respect to H.323
> trunk between cucm and cube.
>
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110117/b54f7b6e/attachment.html>