[cisco-voip] MeetMe Conferencing - choose specific CFB

[Damian Turburville]

I dont believe so. When you initiate a MeetMe conference, the CFB you are 
allocated is on the basis of the MRGL configured on the phone. I have a test 
phone with an MRGL with only hardware CFB within it and it does choose these 
when I initiate the MeetMe conference. I wondered if there was a way of choosing 
the CFB based upon the number dialled rather than the phones MRGL.
DT




________________________________
From: Bill Riley <bill at hitechconnection.net>
To: Damian Turburville <d_turburville at yahoo.com>; cisco-voip at puck.nether.net
Sent: Mon, January 31, 2011 1:11:10 PM
Subject: RE: [cisco-voip] MeetMe Conferencing - choose specific CFB


When you do a Meeteme number conference bridge it is always using the software 
CFB on the server. 

 
From:cisco-voip-bounces at puck.nether.net 
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Damian Turburville
Sent: Monday, January 31, 2011 3:44 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MeetMe Conferencing - choose specific CFB
 
Anyone?
 

________________________________

From:Damian Turburville <d_turburville at yahoo.com>
To: cisco-voip at puck.nether.net
Sent: Thu, January 27, 2011 10:50:53 AM
Subject: [cisco-voip] MeetMe Conferencing - choose specific CFB
Hi,
I am pretty sure you cant do this but I will ask anyway :-)
I have a CUCM 6 cluster (1 Pub, 2 Sub) with various CFB configured, some 
hardware on the PSTN routers (max participants 8) and some software on the CUCM 
servers themselves (max participants 48)
I have a MeetMe range of numbers configured (6301 - 6304) and an MRGL associated 
with my phone that is set to use the HW CFB (max participants 8)
So all of this means that I can setup MeetMe conferences that can take a max of 
8 participants from my phone (I believe the conf bridge is allocated on the 
basis of the configured MRGL for the endpoint that initiates the conf). Now if 
there was a need for a large conference for some reason, I would have to 
associate my phone with a different MRGL so I would access the SW CFB rather 
than the HW CFB when I press the MeetMe button. This would be annoying.
Is there any way of associating the MeetMe number with a specific CFB? i.e. 
could I have 6301 and 6302 using the HW CFB and 6303 and 6304 using the SW CFB?
Cheers,
DT


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110131/754eb614/attachment.html>