[cisco-voip] MOH for certain Device pool

[Buchanan, James]

Not really-the best you can do is tone-on-hold. What most folks do is create a blank wave file and use that as the MOH audio source. That leaves you the option in the future also.

James Buchanan| UC Technology Manager | Presidio South | Presidio Networked Solutions
12 Cadillac Dr Ste 130 Brentwood, TN 37027 | jbuchanan at presidio.com<mailto:jbuchanan at presidio.com>
D: 615-866-5729 | F:615-866-5781  www.presidio.com<http://www.presidio.com/>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Saboor Khan
Sent: Friday, July 08, 2011 9:09 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] MOH for certain Device pool

Is it possible put no MOH for particular device pool, although I am puttin None in both field but it still running.

Thanks

Regards,

ASK
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110708/b6d11a29/attachment.html>