[cisco-voip] NEC CUCM Integration

[Paul]

Since NEC hides their documentation behind some support contracts, the best I've seen available is this

http://tinyurl.com/47fsgm


but then again you're asking for SIP and not QSIG integration. . . 


If you can, I'd try QSIG first and then go SIP.

________________________________
From: bcchimp <bcchimp at gmail.com>
To: cisco-voip at puck.nether.net
Sent: Tuesday, July 12, 2011 6:23 AM
Subject: Re: [cisco-voip] NEC CUCM Integration


All,

Just wanted to re-post this questions to see if anyone else has successfully done this.  I’m looking to setup a SIP trunk between my 8.6 CUCM and an NEC SV8300.  

Any help/instructions that anyone can provide would be appreciated.  My biggest problem is the NEC PBX, I do not have much knowledge of how to configure it.

Thanks,
Tim

From:Matt Slaga (AM) [mailto:matt.slaga at dimensiondata.com] 
Sent: Wednesday, June 22, 2011 12:46 PM
To: Tim H; Wellnitz, Erick A.
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] NEC CUCM Integration

The term ‘intercluster’ is pretty much a Cisco proprietary connection between UCM clusters.  You only need a basic SIP trunk between the Cisco environment and NEC, and a good test plan to ensure all transfers, hold, etc work fine.



From:cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim H
Sent: Wednesday, June 22, 2011 12:29 PM
To: Wellnitz, Erick A.
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] NEC CUCM Integration



The NEC PBX does support SIP, just not sure about the inter-cluster
On Wed, Jun 22, 2011 at 12:24 PM, Wellnitz, Erick A. <erick.wellnitz at kattenlaw.com> wrote:
Only if your NEC supports SIP or H323.

From:cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim H
Sent: Wednesday, June 22, 2011 11:12 AM
To: Cristobal Priego
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] NEC CUCM Integration

No inter-cluster trunking using SIP or anything of the sort?
On Wed, Jun 22, 2011 at 12:00 PM, Cristobal Priego <cristobalpriego at gmail.com> wrote:
you can integrate the 2 systems through a PRI or a T1 CAS
2011/6/22 Tim H <bcchimp at gmail.com>
Anyone out there have experience or documentation on how to integrate an NEC PBX with CUCM?
>
>Looking to just be able to make calls between the two.
>
>Thanks,
>Tim
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip


===========================================================
CIRCULAR 230 DISCLOSURE: Pursuant to Regulations Governing Practice Before the Internal Revenue
Service, any tax advice contained herein is not intended or written to be used and cannot be used
by a taxpayer for the purpose of avoiding tax penalties that may be imposed on the taxpayer.
===========================================================
CONFIDENTIALITY NOTICE:
This electronic mail message and any attached files contain information intended for the exclusive
use of the individual or entity to whom it is addressed and may contain information that is
proprietary, privileged, confidential and/or exempt from disclosure under applicable law.  If you
are not the intended recipient, you are hereby notified that any viewing, copying, disclosure or 
distribution of this information may be subject to legal restriction or sanction.  Please notify
the sender, by electronic mail or telephone, of any unintended recipients and delete the original 
message without making any copies.
===========================================================
NOTIFICATION:  Katten Muchin Rosenman LLP is an Illinois limited liability partnership that has
elected to be governed by the Illinois Uniform Partnership Act (1997).
=========================================================== 



itevomcid 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip