[cisco-voip] 7940 to SIP - Manual or plug and play?

[Mac GroupStudy]

By default, the 7940 will act like a mobile phone; you dial a number and
then you have to press the dial soft key to complete the call. In other
words, the 7940 will not recognize your dial plan because it does not send
the numbers digit by digit like a SCCP phone does. Sorry, the way I read it
you were wanting to migrate several phones.

On Thu, Jul 28, 2011 at 4:04 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> Thanks. I'm just looking to update one phone to test ACLs. We're in the
> midst of updating our ACLs and I want to take this opportunity to include
> SIP support in them. We have an ATA-187 I can use, but I'd like to use both.
> Easier to handle the phone really.
>
> At this point, I'm not too concerned with how it behaves as long as it
> works. I can dial extensions without worrying to much right?
>
> There are manual instructions out there, I guess I can follow those.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ------------------------------
> *From: *"Mac GroupStudy" <mac.groupstudy at gmail.com>
> *To: *"Lelio Fulgenzi" <lelio at uoguelph.ca>
> *Cc: *cisco-voip at puck.nether.net
> *Sent: *Thursday, July 28, 2011 4:00:02 PM
> *Subject: *Re: [cisco-voip] 7940 to SIP - Manual or plug and play?
>
>
> By default it will be SCCP. You you either have to change the default auto
> register protocol to SIP and reset all phones or you could use a BAT
> function for SCCP to SIP. However, might I recommended you not change 7940
> phones to SIP. A 7940 is considered a Type A phone (like a 7960 and I think
> a 7905 is in that group). Although they will support SIP you lose a lot of
> functionality when you do that. Dialing acts different (unless you build SIP
> dial rules) and many features are lost on these model phones. May I ask why
> you want to make them SIP phones?
>
> On Thu, Jul 28, 2011 at 3:41 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
>> If I want to migrate a 7940 from SCCP to SIP, do I have to manually go
>> through the process or can I just plug in a 7940 into the network and when
>> it talks to CallManager, if it's configured as a SIP phone, it will download
>> the SIP firmware?
>>
>>
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Cooking with unix is easy. You just sed it and forget it.
>>                               - LFJ (with apologies to Mr. Popeil)
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110728/3b954dee/attachment.html>