[cisco-voip] 3640 Modem pool

[Wesley Schochet]

I have an old 3640 that was serving as a modem pool.  It was using an external T1 (probably a PRI) from the telco.  The router and the circuit were taken down because we were old no one was using it.  Well, of course, someone was.   Now I need to rebuild it and have no idea how.  Of course the config on the 3640 is gone.
 
I have a 2851 that I am using for PRI trunking for voice now.  I'd like to either add the modem pool functionality to the 2851 or use an open 1 port on the 2851 to run the old 3640.
 
Any guidance would be appreciated!

Confidentiality Statement:
This email/fax, including attachments, may include confidential
and/or proprietary information and may be used only by the
person or entity to which it is addressed. If the reader of 
this email/fax is not the intended recipient or his or her 
agent, the reader is hereby notified that any dissemination, 
distribution or copying of this email/fax is prohibited. If you 
have received this email/fax in error, please notify the sender 
by replying to this message and deleting this email or 
destroying this facsimile immediately.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110728/a5dfebc9/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Header
Type: application/octet-stream
Size: 1270 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110728/a5dfebc9/attachment.obj>