[cisco-voip] ports for SRST?

[AbdusSaboor Khan]

Yes we use 2000

call-manager-fallback
 max-conferences 8 gain -6
 transfer-system full-consult
 limit-dn 7942 4
 limit-dn 7962 22
 limit-dn CIPC 5
 timeouts interdigit 5
 ip source-address 10.224.xx.xx port 2000
 max-ephones 40
 max-dn 120 preference 2
 system message primary SRST mode
 system message secondary SRST mode
 transfer-pattern 2....
 default-destination 22550
 voicemail 9xxxxxxxxxx
 no huntstop
 alias 1 22550 to 22550 preference 1
 call-forward pattern .T
 call-forward busy 9xxxxxxxxxx
 call-forward noan 9xxxxxxxxxx timeout 20
 time-zone 5



On Fri, Jul 29, 2011 at 2:58 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> Just curious, I can't find a TCP/UDP port utilization document for SRST.
> I'm guessing all I need is TCP port 2000 open from the phones to the SRST
> router. I already have the udp range 16384 32767 open from phones to the
> routers to communicate to the gateway as well as some others for DHCP, etc.
>
> Thoughts?
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110729/18f8d158/attachment.html>