[cisco-voip] qos help

me at go0se.com me at go0se.com
Fri Jun 3 13:47:57 EDT 2011


There are a 1000 ways to do QoS. Everyone does it a little different.

http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a0080114326.shtml

Thanks,

Go0se

My blog:
http://atc.go0se.com

--------------------------------------------
Help Hopegivers International
Feed the orphans of Haiti and India
http://www.hopegivers.org
--------------------------------------------

> hello,
>  
> I need for qos setup pls
> topology is  here
>  
> (ccm and database )-central----mpls ISP-- branch - (ccm and database)
> there is database replication between cental and branch and also ccm
> servers
> signaling and voip.
>  
> central router connected to ths ISP viq gi0/2.222  subif.
> my qos config here. any suggestion.is that corect config do you thnk ?
> should i specfy band command under main int also. but this time other vlan
> traffic will suffer.
>  
> class-map match-all ccmsig
>  match access-group name ccmqos (acl between central ccm and branch ccm)
> class-map match-all replication
>  match access-group 130(acl between database server ip's)
> class-map match-any voice
>  match  dscp ef
>  match access-group 151(udp any any 16384 32767)
> !
> policy-map ccm
>  class ccmsig
>   bandwidth 512
>  class voice
>   priority percent 25
>   set dscp ef
>  class replikasyon
>     police 5000000
> policy-map parent
>  class class-default
>   shape average percent 100
>   service-policy ccm
>  
> interface GigabitEthernet0/3.232
>  des toISP_mpls
>  bandwidth 10000
>  encapsulation dot1Q 232
>  service-policy output parent
> !_______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>




More information about the cisco-voip mailing list