[cisco-voip] Unity COnnection MWI

[Lelio Fulgenzi]

Yes, those changes were made for the sake of efficiency. Take a look at this thread... 

https://supportforums.cisco.com/message/1211736#1211736 

I believe you can change it back in Unity, but in Connection, it's not modifiable. 




----- Original Message -----
From: "Nick" <csvoip at googlemail.com> 
To: cisco-voip at puck.nether.net 
Sent: Monday, June 6, 2011 4:41:20 AM 
Subject: [cisco-voip] Unity COnnection MWI 


With newer versions of Unity and Unity Connection, the MWI light does not got out until you delete or save the message does anyone know if there is a parameter to change 
it back so that the light goes out as soon as it's been read. 

Cheers, Nick 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110608/ac98a251/attachment.html>