[cisco-voip] MGCP with CUCM 8.5

[Chris Ward (chrward)]

8.0 introduce support for MGCP version 1.0. There were minimum IOS
requirements to use MGCP 1.0  with UCM 8.0, but MGCP .1 should still
function.

 

+Chris

Hosted Collaboration Solution TME

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Eric Butcher
Sent: Thursday, March 03, 2011 10:54 AM
To: Scott Voll; Ahmed Elnagar
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MGCP with CUCM 8.5

 

I don't recall 15.x train being required for MGCP in 8.5...  MGCP was
not supported in 8.x on 2900/3900 series gateways when they first came
out and you had to use h323 instead, until 15.1.1 (I think?).  Is this
what you're referring to?

 

I do know I'm running 3845's right now on 12.4(20)T5, MGCP, and CUCM
8.0.3a.  It stands to reason older gateways can run MGCP on the 8.x
train using pre-15.x code.

 

 

Eric Butcher

Cisco Unified Communications Engineer
CDW Professional Services

11711 N Meridian, Ste 225

Carmel, IN  46032
( 317.569.4282 - IP Phone
( 765.744.1458 - Mobile
* eric.butcher at cdw.com

http://www.cdw.com/

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Thursday, March 03, 2011 9:50 AM
To: Ahmed Elnagar
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MGCP with CUCM 8.5

 

I'm pretty sure you'll run into problems.  In order to support CM 8.5
and if you want to use your current hardware, you will most likely have
to move to H323 as I believe you have to be on a 15.xT train for
support, which these do not support.

 

If you are planning on also using them for SRST, I think it's time to
retire these GW's and buy something newer.

 

YMMV

 

Scott

On Wed, Mar 2, 2011 at 11:49 AM, Ahmed Elnagar <
ahmed_elnagar at rayacorp.com> wrote:

Hi all;

 

I am planning to upgrade CUCM to version 8.5 and currently running 4.2 L

 

I have the following gateways as MGCP; I want to know if they are going
to work normally with current software or not:

 

2600 series router version 12.3(11)YZ2

1700 series router version 12.3(14)T3

 

Best Regards,

Ahmed Elnagar | CCIE#24697 Voice

 

Raya IT - Professional Networking Services

Mobile    : +20190016211

Tel          : +20238276000 Ext. 2475

Fax         : +20238372930

Email      : ahmed_elnagar at rayacorp.com
Address : El Motamayez District - 6th of October

 

 

 

Disclaimer: NOTICE The information contained in this message is
confidential and is intended for the addressee(s) only. If you have
received this message in error or there are any problems please notify
the originator immediately. The unauthorized use, disclosure, copying or
alteration of this message is strictly forbidden. Raya will not be
liable for direct, special, indirect or consequential damages arising
from alteration of the contents of this message by a third party or as a
result of any malicious code or virus being passed on. Views expressed
in this communication are not necessarily those of Raya.If you have
received this message in error, please notify the sender immediately by
email, facsimile or telephone and return and/or destroy the original
message. 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110303/956c8e3f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1183 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110303/956c8e3f/attachment.jpg>