[cisco-voip] Why is my CUBE sending my dial-peers instead of login information to Skype Connect?

[Robert Kulagowski]

On Thu, Mar 3, 2011 at 3:19 PM, Robert Kulagowski <rkulagow at gmail.com> wrote:
> On Thu, Mar 3, 2011 at 2:10 PM, Stephen Welsh
> <stephen.welsh at unifiedfx.com> wrote:
>> Cool ;)
>>
>> If you get DTMF working with outbound calls please share.
>
> This is what I have, and I just dialed my bank and had no issues with
> DTMF.  The calls must go out through Skype because you can see that I
> don't have anything else configured.

Here's what an active call looks like:

USILTLVGW01#sh sip-ua calls
SIP UAC CALL INFO

Call 1
SIP Call ID                : 81164057-451311E0-8042A2CC-9D90C291 at 1.2.3.4
   State of the call       : STATE_ACTIVE (7)
   Substate of the call    : SUBSTATE_NONE (0)
   Calling Number          : 9905100013xxxx
   Called Number           : 13125551212
   Bit Flags               : 0xC04018 0x100 0x80000
   CC Call ID              : 936
   Source IP Address (Sig ): 1.2.3.4
   Destn SIP Req Addr:Port : [63.209.144.201]:5060
   Destn SIP Resp Addr:Port: [63.209.144.201]:5060
   Destination Name        : sip.skype.com
   Number of Media Streams : 1
   Number of Active Streams: 1
   RTP Fork Object         : 0x0
   Media Mode              : flow-through
   Media Stream 1
     State of the stream      : STREAM_ACTIVE
     Stream Call ID           : 936
     Stream Type              : voice+dtmf (0)
     Stream Media Addr Type   : 1
     Negotiated Codec         : g711ulaw (160 bytes)
     Codec Payload Type       : 0
     Negotiated Dtmf-relay    : rtp-nte
     Dtmf-relay Payload Type  : 101
     Media Source IP Addr:Port: [1.2.3.4]:17476
     Media Dest IP Addr:Port  : [63.209.144.201]:20612


Options-Ping    ENABLED:NO    ACTIVE:NO
   Number of SIP User Agent Client(UAC) calls: 1

SIP UAS CALL INFO

   Number of SIP User Agent Server(UAS) calls: 0