[cisco-voip] Calling Party Number issue with ONNET calls

[Scott Voll]

400 per site?

you should be able to use sitecode.XXXX.  One per site.

eg. 40.XXXX with the pre dot drop.  One per site.

Scott

On Tue, Mar 8, 2011 at 6:52 PM, Cool Boy <collboy80 at yahoo.com> wrote:

> Well, thanks for your email. It does work if i have  few sites but here I
> am talking about 400 sites. And by using this solution, we are creating 400
> translation pattern for each site which will be 16000 tranlstaion by the end
> of day. What I am looking for to use the calling party transformation if we
> can get through with that or any other option?
>
>  ------------------------------
> *From:* Mac GroupStudy <mac.groupstudy at gmail.com>
> *To:* Cool Boy <collboy80 at yahoo.com>
> *Cc:* cisco-voip at puck.nether.net
> *Sent:* Tue, March 8, 2011 8:40:43 PM
> *Subject:* Re: [cisco-voip] Calling Party Number issue with ONNET calls
>
> How about something like this:
>
> Site A to B uses a translation pattern that matches what users dial from A
> to reach B 50.4001 with DDI PreDot on Called Party. Calling Party
> Transformation Prefixes to 30 onto the A Site Calling Phone so that it shows
> up correctly at Site B for calling them right back. Do the opposite at Site
> B by building a Translation pattern of 30.4001 again with DDI of PreDot on
> the Called Party. For B to A Calling Party, again Prefix but prefix a 50
> onto the Calling Party to make it easy on the users at Site A for calling
> back to Site B again.
>
> Does that make sense? I know this will work as I have used it for
> overlapping numbers and Site Codes like you are using. I used extensions of
> 4001 as if it were overlapping numbers in your scenario as well. If thats
> not the case and you have non-contiguous numbers you may have to build a
> couple of Translation to accommodate all the numbers. Control access to the
> Translations with a Partitions.
>
> On Mon, Mar 7, 2011 at 2:19 PM, Cool Boy <collboy80 at yahoo.com> wrote:
>
>>   Hi Guys,
>>
>>
>>
>> I have a problem with Calling number on ONNET to ONNET calls. I am using 4
>> digits DN for each site and each site has its own site code to reach another
>> site. When a user form Site A to dial Site B calls gets connected but caller
>> see only 4 Digit for incoming calls. I tried to use the Calling Party
>> transformation mask but have no luck yet. Please assist.
>>
>>
>>
>> Site A DN  = 4000,  Site A code = 30
>>
>> Site B DN = 4000, Site B Code = 50
>>
>>
>>
>> Regards,
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110309/ba757acb/attachment.html>