[cisco-voip] 7965 Forward all lines

[Lelio Fulgenzi]

As others have said, this is only capable from the CCMuser page as far as I know. Some later versions of CUCM have enabled this, but I believe only for some models (69xx,89xx,99xx). 

At the root of the problem is that the 7900 series phones have not been programmed to reflect the current forwarding state of anything but the primary line, so even when you do forward non-primary lines, nothing on the phone tells you this is case. 

There are some third party applications that you can buy which will allow the user to forward non-primary lines from the phone, but again, without the ability to reflect forwarding state, there are limited. Some of them have gone so far as to edit the line text label to include forwarding state, but this breaks other line text label settings. 

Good luck. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Neal Haas" <nhaas at co.fresno.ca.us> 
To: cisco-voip at puck.nether.net 
Sent: Monday, March 14, 2011 12:22:29 PM 
Subject: [cisco-voip] 7965 Forward all lines 




Right now when I press the CFWDALL button, only the main line is forwarded. How can I change the default behavior to forward all the lines on a 7965 with CFWDALL? 



Thank you 



Neal Haas 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110314/c25425a9/attachment.html>