[cisco-voip] Video Capabilities (CUCM 8.5)

[Dennis Heim]

Have you considered doing a direct database update? I am not sure where it stores that data. Maybe you can check the 8.5 database dictionary.

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Single Number Reach
317.569.4201 Fax
dennis.heim at cdw.com<mailto:dennis.heim at cdw.com>
cdw.com/content/solutions/unified-communications/<http://www.cdw.com/content/solutions/unified-communications/>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Johnny.Crothers at datacraft.co.nz
Sent: Tuesday, March 15, 2011 11:40 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Video Capabilities (CUCM 8.5)

Hi everyone,

Has anyone ever tried to update all phones to enable "Video Capabilities"? I see that you cant do it via BAT, you can change the Enterprise Phone Configuration and the common phone configuration, however this doesn't overwrite a phone that is already configured for this to be disabled.

Anyone got any idea's?

Kind Regards,

Johnny






*****************************************************************************

This email and all contents are subject to the following disclaimer:



http://www.datacraft-asia.com/disclaimer

*****************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110316/6a131fc4/attachment.html>