[cisco-voip] Integrating 9971 with Polycom MCU

[Ruben Trujillo]

Hi Scott,

Thanks for the info.  I've created the h323 gateway using the IP address of the Polycom MCU as well as a route pattern that uses that gateway under the "Gateway/Route List" field.  I get a fast busy though when I attempt to dial a Polycom endpoint though.

Thanks,
Ruben Trujillo
IT Telecom

From: Scott Voll [mailto:svoll.voip at gmail.com]
Sent: Wednesday, March 16, 2011 1:31 PM
To: Ruben Trujillo
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Integrating 9971 with Polycom MCU

not sure about the 9971 but the 7961 with Video we have our polycom RMX2000 setup as a h323 gateway with a route pattern setup.  you dial the route and then enter your conference ID.

Scott
On Wed, Mar 16, 2011 at 9:35 AM, Ruben Trujillo <rtrujill at adobe.com<mailto:rtrujill at adobe.com>> wrote:
Hello,

Does anyone have any info on how to get a Cisco 9971 working with a Polycom MCU?

Thanks,
Ruben

[cid:image001.png at 01CBE3E1.673CB690]

Ruben Trujillo
Telecom Engineer
Adobe Systems

408.536.6006<tel:408.536.6006> (tel)
415.407.1646<tel:415.407.1646> (cell)
rtrujill at adobe.com<mailto:rtrujill at adobe.com>

345 Park Ave
San Jose, CA. 95110
www.adobe.com<http://www.adobe.com>









_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110316/d7d6c43d/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 871 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110316/d7d6c43d/attachment.png>