[cisco-voip] callerID from HiCom300E to CallManager

[Chris Chamberlain]

If I recall correctly we had to purchase a Cornet-NQ license from Siemens in order to get both the number as well as the ASCII display.  On the trunk on the siemens side we have it configured for NQISO and qsig on the cisco gateway.

Chris Chamberlain
Network Engineer
Oakland University

On Mar 16, 2011, at 4:58 PM, Lelio Fulgenzi wrote:

> Just wondering if anyone out there has got caller ID working back and forth from CallManager to a HiCom 300E.
> 
> We've sort of accepted that we can't do it, but this was configured way before my time. I've got a small opportunity to test and apply some changes, but the few things I've done already don't seem to work.
> 
> We're using 6608s and currently configure as NI2.
> 
> Any hints?
> 
> 
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it. 
>                               - LFJ (with apologies to Mr. Popeil)
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110316/cfd83c53/attachment.html>