[cisco-voip] Integrating 9971 with Polycom MCU

[Ruben Trujillo]

I have gotten a Polycom VVX1500 to work before but it was on a CM 6.x lab system that got wiped quite a while ago.  I figured that since the 9971 is also a SIP device that I could get that to work just as I did the VVX1500.  At this point I'm hoping I just need to work out the kinks.

Thanks,
Ruben

From: Ryan Ratliff [mailto:rratliff at cisco.com]
Sent: Wednesday, March 16, 2011 2:27 PM
To: Scott Voll
Cc: Ruben Trujillo; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Integrating 9971 with Polycom MCU

When you are dialing directly into it CUCM has no idea that it's acting as a conference.

-Ryan

On Mar 16, 2011, at 5:11 PM, Scott Voll wrote:

To my knowledge the Polycom MCU will not act as a Conference resource with CM.  you would need a cisco / tandberg in order to do that.

With the polycom you would need to have each endpoint call the MCU and enter the same conference.

am I misunderstanding?

Scott
On Wed, Mar 16, 2011 at 1:59 PM, Ruben Trujillo <rtrujill at adobe.com<mailto:rtrujill at adobe.com>> wrote:
Hi Scott,

Thanks for the info.  I've created the h323 gateway using the IP address of the Polycom MCU as well as a route pattern that uses that gateway under the "Gateway/Route List" field.  I get a fast busy though when I attempt to dial a Polycom endpoint though.

Thanks,
Ruben Trujillo
IT Telecom

From: Scott Voll [mailto:svoll.voip at gmail.com<mailto:svoll.voip at gmail.com>]
Sent: Wednesday, March 16, 2011 1:31 PM
To: Ruben Trujillo
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Integrating 9971 with Polycom MCU

not sure about the 9971 but the 7961 with Video we have our polycom RMX2000 setup as a h323 gateway with a route pattern setup.  you dial the route and then enter your conference ID.

Scott
On Wed, Mar 16, 2011 at 9:35 AM, Ruben Trujillo <rtrujill at adobe.com<mailto:rtrujill at adobe.com>> wrote:
Hello,

Does anyone have any info on how to get a Cisco 9971 working with a Polycom MCU?

Thanks,
Ruben

<image001.png>

Ruben Trujillo
Telecom Engineer
Adobe Systems

408.536.6006<tel:408.536.6006> (tel)
415.407.1646<tel:415.407.1646> (cell)
rtrujill at adobe.com<mailto:rtrujill at adobe.com>

345 Park Ave
San Jose, CA. 95110
www.adobe.com<http://www.adobe.com/>









_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110316/2feaf237/attachment.html>