[cisco-voip] monitoring RAID rebuild

Lelio Fulgenzi lelio at uoguelph.ca
Thu Mar 17 16:34:05 EDT 2011


ok. thanks. worth investigating and configuring ahead of time then. we have the ip addresses and cables assigned, i just hadn't had the time to investigate. 

lelio 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Mike King" <me at mpking.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "Jobe Gates" <jobe at gates-tribe.com>, cisco-voip at puck.nether.net 
Sent: Thursday, March 17, 2011 4:27:20 PM 
Subject: Re: [cisco-voip] monitoring RAID rebuild 

I'm fairly sure the only option that iLO advanced addes is support for GUI KVM via the iLO webpage. (It does other stuff like power save and stuff, but I'd imagine that cisco would want that disabled) 


The iLO basic version 100% gives access to server vitals, as well as a Text Mode KVM. At least it does on HP servers. I would imagine the Cisco rebranded servers have not removed this. 


On Thu, Mar 17, 2011 at 10:16 AM, Lelio Fulgenzi < lelio at uoguelph.ca > wrote: 




we bought some HP servers that had iLO advanced for one year, not sure what they look like now. 

does the basic version give us the same thing? 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



From: "Jobe Gates" < jobe at gates-tribe.com > 

To: "Lelio Fulgenzi" < lelio at uoguelph.ca > 
Cc: "Jason Aarons (US)" < jason.aarons at us.didata.com >, cisco-voip at puck.nether.net 
Sent: Thursday, March 17, 2011 10:14:59 AM 



Subject: Re: [cisco-voip] monitoring RAID rebuild 


ilo. 

Thanks, 
Jobe 

On Mar 17, 2011, at 10:11 AM, Lelio Fulgenzi < lelio at uoguelph.ca > wrote: 






show hardware 

should give you some level of detail. 

what is the equivalent of IMM for HPs? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



From: "Jason Aarons (US)" < jason.aarons at us.didata.com > 
To: "Lelio Fulgenzi" < lelio at uoguelph.ca >, "Scott Voll" < svoll.voip at gmail.com > 
Cc: cisco-voip at puck.nether.net 
Sent: Wednesday, March 16, 2011 11:20:13 PM 
Subject: RE: [cisco-voip] monitoring RAID rebuild 




You need to reboot and press the F botton to put a ip address on the IMM (by default it used a DHCP Address), then you need to plug the IMM Ethernet up and login via telnet or http and see what is really going on with the raid controller; 



Nothing in GUI or CLI will tell you what the IMM will tell you. 



Here's a repost from 15 Feb on puck; 



Here’s the link to the most current IBM Firmware CD. The update CD detected 4 critical updates including the SAS controller, bootable linux, next yes ok, reboot. It takes about 45min per server. 



http://www.cisco.com/cisco/software/release.html?mdfid=282821927&softwareid=283046743&release=3.6%281%29&relind=AVAILABLE&rellifecycle=&reltype=latest 



According to IBM TAC, the error cleared so that is why the front panel was not lit. They reviewed the server info last night and said that the hardware looked good except it was running old firmware. They sent all of the info to Cisco TAC and we need to see if IBM Support would recommend a firmware upgrade. IBM TAC recommended upgrading but said that the rev levels should come from Cisco. 

As of this morning, the server was functioning normal. We will have to see if it gets into that state again. 

Interesting, but the outside panel didn’t have a yellow alarm and this info didn’t make it up into RTMT, GUI, etc? 

Just find it odd Cisco TAC couldn’t see this without going into IMM? Wonder if snmp/IBM Director would have thrown a hardware alarm…but the average small shop would expect some red/yellow lights on the outside of the server. 



For quicker access, you can telnet to the IMM as well. To view the log after logging in, use readlog. 





Looks like the drive might be having issues (times below are GMT) - 



<image001.png> 





-----Original Message----- 
From: cisco-voip-bounces at puck.nether.net [mailto: cisco-voip-bounces at puck.nether.net ] On Behalf Of Lelio Fulgenzi 
Sent: Wednesday, March 16, 2011 7:06 PM 
To: Scott Voll 
Cc: cisco-voip at puck.nether.net 
Subject: Re: [cisco-voip] monitoring RAID rebuild 



I believe RTMT might show you something or there is a show status / system command from the CLI. It's not a live status like the windows GUI but this way you can see that it's rebuilding. 



Check it out. If you don't see it let me know and I'll log on and see what I can find. 



Sent from my iPhone 



On Mar 16, 2011, at 6:52 PM, Scott Voll < svoll.voip at gmail.com > wrote: 



> I have a TAC case open and they say my HD is having issues. If I pop out the HD and put a new one in, how do I monitor the RAID 1 Rebuild to know that it's done and where it is in the process? 

> 

> IBM mcs 7835i3 

> 

> CM 7.1.5 

> 

> TIA 

> 

> Scott 

> _______________________________________________ 

> cisco-voip mailing list 

> cisco-voip at puck.nether.net 

> https://puck.nether.net/mailman/listinfo/cisco-voip 



_______________________________________________ 

cisco-voip mailing list 

cisco-voip at puck.nether.net 

https://puck.nether.net/mailman/listinfo/cisco-voip 




DDIPT

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110317/3081e7d6/attachment.html>


More information about the cisco-voip mailing list