[cisco-voip] Guide to configure MWI on CUE 8.X

[ROZA, Ariel]

Guys and gals,

 

  I am configuring a CUCME 8.5/CUE8.0 system, and I am having problems trying to make MWI work correctly.

 

I was used to the "old way" of setting up MWI on CUE 2.X, but in this version I am at a loss.

Going through the configuration guide, I see configurations for MWI under SIP and under SCCP, with different modes (outcall, SIP Notify, SIP Unsolicited), but the instructions are confusing in regards to which mode is for which situation, and when apply each command. Does anyone has a comprehensive guide on how to configure MWI for SCCP and for SIP?

 

Regards,

 

 

ARIEL ROZA
Advanced Engineering

 

LOGICALIS
Perú 327 1er Piso - C.A.B.A. - Argentina - C1067AAG
Tel/Fax: +54 (11) 4344-0300
ariel.roza at la.logicalis.com <mailto:ariel.roza at la.logicalis.com> 
www.la.logicalis.com <http://www.la.logicalis.com> 
www.logicalisnow.com <http://www.logicalisnow.com> 

	Por favor, piense en el medioambiente antes de imprimir este email. 
La presente información se envía únicamente para el destinatario, y contiene información de carácter CONFIDENCIAL o PRIVLEGIADA.
La modificación, retransmisión, difusón, copia u otro uso de esta información por cualquier medio, por personas distintas al destinatario, están estrictamente prohibidas.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110318/ec75a578/attachment.html>