[cisco-voip] v15 boot system command

[Scott Voll]

here's mine:

version 15.0
no service pad
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
service sequence-numbers
!
hostname hsbvg224_1
!
boot-start-marker
boot system slot0:vg224-i6s-mz.150-1.M3.bin
boot-end-marker

Seems to work fine for us.

Scott

On Wed, Mar 23, 2011 at 7:28 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> So I upgraded a VG224 from v12 to v15. Not too much of an issue, but I
> noticed that after the upgrade was done, there was no "boot system slot0:"
> command.
>
> From what I recall, with no "boot system" command, it boots with the
> first(?) IOS image listed. I'm guessing v15 won't look at a v12 IOS image,
> but what happens when I load another v15 image onto the box?
>
> What have others seen?
>
> Lelio
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110323/e5b5fe43/attachment.html>