[cisco-voip] Cisco 99xx Phone Question

[Wes Sisk]

very interesting use case.  I checked with several folks and none could 
come up with a way to remove that specific softkey.  They pointed out 
that video mute can't be disabled either.

Regards,
Wes

On 3/31/2011 9:58 AM, Lewis, Chris wrote:
> Thanks for that - Will check it out.
>
> Yes and a wall mount  :-)
>
> The 99xx don't allow you to edit softkeys - you can use the feature control policy which covers some parts but not all.
>
> You are correct in your assumption of my issue.
>
>
>
> -----Original Message-----
> From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com]
> Sent: 31 March 2011 14:55
> To: Paul; Lewis, Chris; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Cisco 99xx Phone Question
>
> I've only used the Algosolutions.com callbox or similar.
>
> I would think your 9951 lobby phone with a camera would need a theft cable lock :)
>
> Can you edit the softkey template to remove show/hide?  Is the problem someone can call the receptionist and hit hide?
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Paul
> Sent: Thursday, March 31, 2011 9:29 AM
> To: Lewis, Chris; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Cisco 99xx Phone Question
>
> Do you not want video on the phone at all? If so, just pull the usb camera out.
> . . that'll disable it for sure.
>
>
>
>
> ________________________________
> From:"Lewis, Chris"<Chris.Lewis at magnetar.com>  To:"cisco-voip at puck.nether.net"<cisco-voip at puck.nether.net>
> Sent: Thu, March 31, 2011 4:00:16 AM
> Subject: [cisco-voip] Cisco 99xx Phone Question
>
>
> I am trying to configure a “lobby” phone and a reception desk phone which are both 9951’s.
>
> The “lobby” phone does have a camera attached and the reception desk one doesn’t
>
> so I can allow 1 way calls.  This works and I can configure PLAR as expected.
> The issue is that I am unable to remove the  Show/Hide Video from the “lobby”
> phone when the call is connected.  I have looked through everything and cannot see a way.
>
> Is this not possible?
>
> If not has anyone set these phones up in lobbys etc and if so how have you achieved your goal?
>
>
> Chris
>
>
> The information contained in this message and its attachments is intended only for the private and confidential use of the intended recipient(s).  If you are not the intended recipient (or have received this e-mail in error) please notify
>
> the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e- mail is strictly prohibited.
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> -----------------------------------------
> Disclaimer:
>
> This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only.  If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful.  If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
>
> The information contained in this message and its attachments
> is intended only for the private and confidential use of the
> intended recipient(s).  If you are not the intended recipient
> (or have received this e-mail in error) please notify the
> sender immediately and destroy this e-mail. Any unauthorized
> copying, disclosure or distribution of the material in this e-
> mail is strictly prohibited.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip