[cisco-voip] Cisco ATA 187 and connection plar

[Anthony Kouloglou]

Hi All,
i will test in a the next couple of hours on ATA187.
I cross my fingers to work ...

On 4/5/2011 17:27, Lelio Fulgenzi wrote:
> According to that doc:
>
> ------------------------------------------------------------------------
>
> *Note *Only Cisco Unified IP Phones 7940/41, 7960/61, and 7970/71 
> support PLAR for SIP.
>
> ------------------------------------------------------------------------
>
> Guess that means if you need analog PLAR, you need VG224/202/204 
> running something else other than SIP?
>
> Good to know.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ------------------------------------------------------------------------
> *From: *"Ryan Ratliff" <rratliff at cisco.com>
> *To: *"Anthony Kouloglou" <akoul at dataways.gr>
> *Cc: *"cisco-voip at puck-nether.net" <cisco-voip at puck.nether.net>
> *Sent: *Wednesday, May 4, 2011 10:22:34 AM
> *Subject: *Re: [cisco-voip] Cisco ATA 187 and connection plar
>
> SIP phones don't signal offhook to CUCM in the same way SCCP phones do 
> so there is no opportunity for CUCM to treat it as a call with no 
> dialed number.
>
> For SIP you need to configure dial rules.
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmsys/a03adial.html#wpmkr1039674
>
> -Ryan
>
> On May 4, 2011, at 9:06 AM, Anthony Kouloglou wrote:
>
> Hi, i have followed cisco recommendations to simulate hot line support 
> for CUCM 7.1.5.
> These recommendations are:
> created a blank translation pattern that has a partition that is 
> included only in a css that a few devices have.
> This TP, has an Called Party Transform mask mask of a target DN.
> So, when, one of these phones go offhook, it matches this TP and dials 
> the appropriate number.
> But this does not seem to work with ATA 187.
> Is does nothing when picking up the phone.
> Does it has to do with SIP?
> Has anyone tried it before?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110504/2d970d43/attachment.html>