[cisco-voip] Use an FXO port for outbound calling only - no answering of incoming calls

[Ryan Ratliff]

Try the 'ring number' command under the voice-port.

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/voice_port_configuration_guide/ch2_alog.html#wpxref97673

Yeah that doc looks to be old but you have to be able to control how many rings before an FXO port answers.

-Ryan

On May 4, 2011, at 3:25 PM, Tim Reimers wrote:

Yup –
 
It’s a CME implementation at home, actually –
 
My regular copper phone line is POTS – that is connected to the red/green pair running throughout the house, with multiple phones on it.
It’s also connected to an FXO port on a 2600 acting as a gateway –
 
For now, I want CME (and the associated VOIP phones/devices) not to be answering calls on that line
*otherwise my non-technical family will not be amused that the house phones ring once and never again
 
I want the regular house phones to ring until someone answers or the answering machine picks up.
As it is, with no dial-peers at all on the router, the FXO port goes off hook after one ring and tries it’s best to do something to process that call.
 
At some point down the road, I may integrate the rest of the house phones on an ATA or something like that – but only after I’ve worked out some kind of
failover scenario such that if there were a power-failure (or router-failure), the regular phones would get all incoming calls.
 
I’d get even more ‘leave the phones alone’ kind of thing if in order to ‘fix’ the phone system, my family had to go log into a router and restart something while I was at work….
;-)
 
 
 
 
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Wednesday, May 04, 2011 3:19 PM
To: Paul
Cc: Tim Reimers; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Use an FXO port for outbound calling only - no answering of incoming calls
 
I think the idea is he has two devices on the same copper and doesn't want one of them to ever ring.
 
Think of it as having two phones in your house.  You want one of them to only be used for outbound calls and the other to ring and be able to answer inbound calls.
 
Unless you can do something with the physical wiring to make the FXO never see ring voltage I think you are better off sticking an FXS card into the router with the FXO, connecting the same device currently sharing the pair with the FXO to this FXS and directing inbound calls to the FXS port.
 
-Ryan
 
On May 4, 2011, at 2:06 PM, Paul wrote:
 
I believe so long as you keep the phone number that is associated with that CO trunk, nobody should be calling it in the first place except by chance. If you want to dedicate it for outbound calling and want it to give a busy signal when someone calls it, just PLAR it to an non-existent number within that box. A called FXO port will automatically ring and give you dialtone with nothing configured as it's supposed to.
 
From: Tim Reimers <treimers at ashevillenc.gov>
To: cisco-voip at puck.nether.net
Sent: Wednesday, May 4, 2011 8:08 AM
Subject: Re: [cisco-voip] Use an FXO port for outbound calling only - no answering of incoming calls

 
Hi all –
 
I’d like to use an FXO port for outbound calling only –
I don’t want the port to go offhook    _at all_  for any incoming call/ring event-
there is other POTS equipment on the same copper pair that should answer any inbound calls.
 
Currently, I have no dial-peers at all in it-  but it’s still answering calls even with nothing configured on it.
 
I can shutdown the ports obviously, but that’s rather counterproductive to using them for outbound calling  ;-)
 
thanks, Tim

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110504/abec7f7a/attachment.html>