[cisco-voip] [cisco-Voip] code for Calls with CME

[Mike Lydick]

There are two methods with CME:

Call Blocking, this will be supported by TAC.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeblock.html

TCL Script with radius authentication. This one is not TAC supported. There
is a sample at on this site.

http://smbitsolutions.wordpress.com/2010/12/22/all-about-cisco-unified-communications-manager-express/


<http://smbitsolutions.wordpress.com/2010/12/22/all-about-cisco-unified-communications-manager-express/>
Best Regards,

Mike Lydick




On Sun, May 15, 2011 at 6:31 AM, sheref hf <sheref_hf at hotmail.com> wrote:

>  Any one can advise me about these configuration
>
>
>
>
>
> ------------------------------
> From: sheref_hf at hotmail.com
> To: cisco-voip at puck.nether.net
> Subject: [cisco-Voip] code for Calls with CME
> Date: Fri, 13 May 2011 23:27:55 +0000
>
>
> Hi all
> Have a nice day
>
> I have CME and I want to configure forced Authorized codes with
> International Calls
>
> when user dial international calls... needs enter code to complete this
> call
>
> How can I do this .. ?
>
>
> Best Regards,
>
>
>
> *Sherif Ibrahem Mohamed*
>
> Network Engineer
>
> *Silicon21NIT Services***
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110515/bbbe3a42/attachment.html>