[cisco-voip] new v15 command - ip address trusted authenticate

[Lelio Fulgenzi]

I see the following on reboot of the v15 routers we just upgraded. Two questions: 

    1. I don't see the "ip address trusted authenticate" command under the "voice service voip" section, I only see "allow-connections h323 to sip", is this command default so we don't see it in a show run? 
    2. Will this affect Cisco Unity Express connections to the router? I'm guessing I have to add the CUE loopback address to this security list? 




!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 
!!Following voice command is enabled: !! 
!! voice service voip !! 
!! ip address trusted authenticate !! 
!! !! 
!!The command enables the ip address authentication !! 
!!on incoming H.323 or SIP trunk calls for toll fraud !! 
!!prevention supports. !! 
!! 
!! 
!!Please use "show ip address trusted list" command !! 
!!to display a list of valid ip addresses for incoming !! 
!!H.323 or SIP trunk calls. !! 
!! !! 
!!Additional valid ip addresses can be added via the !! 
!!following command line: !! 
!! voice service voip !! 
!! ip address trusted list !! 
!! ipv4 <ipv4-address> [<ipv4 network-mask>] !! 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110516/507cc9fb/attachment.html>