[cisco-voip] Caller-ID using MGCP and FXO ports?

[David Zhars]

UCM 8 and IOS 15 here.  (not sure of what flavor of 15).
It works.  I seem to only get the calling number, not any name, but that
could be a bad setup on my end.  If I plug in a regular Caller ID box, I get
both name and number, so either the MGCP and FXO solution only provides
calling number, or my setup is funky.
Short answer, yes FXO and MGCP you can get caller ID.

On Fri, May 13, 2011 at 12:32 PM, Haas, Neal <nhaas at co.fresno.ca.us> wrote:

> If I remember correctly It will only show the extension of the port.
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Countryman, Edward
> *Sent:* Friday, May 13, 2011 10:25 AM
>
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Caller-ID using MGCP and FXO ports?
>
>
>
> Does anyone know definitely if telco caller id is support on FXO ports
> controlled by MGCP?
>
>
>
> In reading Cisco’s website it implies it is (with certain IOS) but there
> are countless blogs indicating it does not work.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110521/7b0858f4/attachment.html>