[cisco-voip] UCCX 8.0: Best Practice to update an active script

[Anthony Kouloglou]

Yes, that is how i do it!
But then, i have to go to the application that used that script and 
change it there.
And i have to update all the parameters that are changed!!
In older CRS versions, it used to automatic stop the crs engine, upload 
the script and then restart the engine.
But now it just fails!

On 30/5/2011 17:21, Rasim Duric wrote:
>
> Did you try ‘Save As’ a different file name and upload?
>
> Rasim Duric
>
> Network Analyst (CCS)
>
> University of Guelph
>
> Guelph, N1G 2W1, ON
>
> 519-824-4120x53146
>
> rduric at uoguelph.ca <mailto:rduric at uoguelph.ca>
>
> *From:*Anthony Kouloglou [mailto:akoul at dataways.gr]
> *Sent:* May-30-11 10:01 AM
> *To:* Rasim Duric
> *Cc:* 'cisco-voip at puck-nether.net'
> *Subject:* Re: [cisco-voip] UCCX 8.0: Best Practice to update an 
> active script
>
> Hi Rasim,
> i didn't get it!
> After i validate and save the script from the UCCX editor, i upload it 
> to the script.
> There, i get "script already exists, overwrite existing one?
> i choose yes and i get "Error while uploading the file. Please try again."
>
> On 30/5/2011 16:33, Rasim Duric wrote:
>
> The best way is to follow VSURE, i.e. Validate, Save, Upload, Refresh, 
> Execute.
>
> Rasim Duric
>
> Network Analyst (CCS)
>
> University of Guelph
>
> Guelph, N1G 2W1, ON
>
> 519-824-4120x53146
>
> rduric at uoguelph.ca <mailto:rduric at uoguelph.ca>
>
> *From:*cisco-voip-bounces at puck.nether.net 
> <mailto:cisco-voip-bounces at puck.nether.net> 
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *Anthony 
> Kouloglou
> *Sent:* May-30-11 5:18 AM
> *To:* cisco-voip at puck-nether.net <mailto:cisco-voip at puck-nether.net>
> *Subject:* [cisco-voip] UCCX 8.0: Best Practice to update an active script
>
> Hi,
> in my UCCX 8.0 (standard) i often want to perform a change on the 
> sctipt of an application.
> But when i try to upload it where the old script is, i choose to 
> replace the old one but then i get a fail message.
>
>
> What is the best way to perform it?
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110530/5598cb3c/attachment.html>