[cisco-voip] Maximum string characters in IP Phone Service parameter

[Wes Sisk]

2 options:

1. use onhook dialing.
a. in ccmadmin setup a translation pattern that is > 50 characters long. can you add it?
b. use onhook dialing from a phone to try and dial that > 50 character string.  press the dial softkey or go offhook. does it dial? does it route correctly based on your translation pattern?

2. setup a simple XML file on an external web server following the ipphone services sdk to make a menu with dial items.  create an entry that is > 50 characters.  point your phone to that web service. can you dial it?

/wes



On Nov 2, 2011, at 11:40 AM, Anthony Kouloglou wrote:

Hi Wes,
and how this could be changed internally just to check if it works?
Via a TAC?


On 02-Nov-11 16:08, Wes Sisk wrote:
> 
> when last i checked Internally CUCM call processing cannot handle more than 50 chars so changing this would be counter productive.  any else tried this?
> 
> /wes
> 
> On Nov 2, 2011, at 3:41 AM, Anthony Kouloglou wrote:
> 
> Hi all,
> in a 7.1.5 cluster, i have deployed correctly the autodialer.jsp service.
> It works fine. But...
> How can i change the maximum string characters i can use in the "dialstring"  parameter?
> I cannot put more than 50.
> 
> Thanks
> Anthony
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111102/dee77013/attachment.html>